Special washing machine white electrophoresis paint
Product Introduction :
HS-5500LB/HS-5500 White epoxy acrylic cathodic electrophoretic coating for auto is the 8th generation electrophoretic coating researched and developed by HLS Paint (Shanghai) Co., Ltd. and get the national invention patent and the Shanghai science and technology commission of high-tech transformation project.it represents modern technology of cathodic electrophoretic coating that is environment-friendly with high property and low cost. Such coating does not contain heavy metal like lead, tin, cadmium and mercury etc. It is a two-component, water-dispersed resin. The coating that does not contain tin element meet the latest environ-mental regulations of European Union, North America, Japan and other requirements in advance, which is the inevitable trend of future environ-mental coating and low cost; meanwhile, it took in features of previous products, and can adapt galvanized steel sheet perfectly, almost can be applied to foundation coating of all metal,such as: cold and hot rolled steel sheet, galvanized steel sheet, aluminum products, zinc-aluminum alloy sheet and stainless steel sheet etc.
This product features shown below :
1, Low curing temperature, coating yellow degeneration resistance is good, suitable for electrodeposition primer, and then to spray or paint coating process, such as: oil heater, radiator, heater, lamps and lanterns, machinery, home appliances and hardware products and other industries.
2, Simple control of bath and wide operation range is suitable for the operation specification and site equipment for different customers.
3, High throwing power, good internal and external uniformity.
Main ingredients :
|
Pigment: carbon black, kaolin, antirust pigment
|
Solvent: alcohol ether |
|
Additives: surface active agent, prevent shrinkage cavity agent
|
Bath on site management project :
Good bath data and coating quality, from the strict parameters management and maintenance of equipment, production line according to its own reality time situation, can have different management project and specifications, recommend the construction parameters see the table below for reference:
| Classification |
Project |
Control Data |
Testing frequency |
| New bath |
Anolyte |
| Electrophoresis tank |
Ratio |
1:4-5 |
-- |
|
| Ripening time |
24-48 |
-- |
|
| Solid ( 120 ℃ /1h ,% ) |
12±2 |
-- |
once a day |
| PH |
5.3-5.8 |
2.0-3.5 |
once a day |
| Conductivity ( μs/cm ) |
900±400 |
1000±500 |
once a day |
| P/B |
0.25-0.35 |
once a week |
| Solvent content (%) |
0.8-1.5 |
once a week |
| Liquid level Fall head (cm ) |
10-15 |
once a day |
| ED voltage( V ) |
0-300 |
once a day |
| Break voltage ( V ) |
≥350 |
once a week |
| Bath temperature ( ℃ ) |
30±2 |
once a day |
| ED time( S ) |
60~180 |
once a day |
| UF － 1 Tank |
Solid content (%) |
≤2.0 |
once a day |
| UF － 2 Tank |
Solid content (%) |
≤0.8 |
once a day |
| Baking furnace |
Provisions furnace temperature( ℃ ) |
155-175 |
once a day |
| Curing conditions |
Drying temperature |
(150-170) ℃ ×(20-30)min (With content holding tim |
once a day |
Storage, packaging and transportation:
This product is a water-borne industrial coatings, non-hazardous, non-inflammable and explosive products; transportation to prevent direct sunlight, avoid freezing (>5℃ ); Packaging for 50/60/200L Plastic barrel; in the transport and storage of drums should be maintained clean, avoid charging the dirt brought in on drums during filling tank, again checked and confirmed that the quality of products, including paste resin, emulsions and additives should be indoor storage, good ventilation, dry, protect against freezing and overheating, the storage temperature should be controlled at 5～35℃, products from the date of production, over shelf, experimentation is required to determine whether can continue to use.
If you want to learn more about HLS coating products, please contact Sales Department of Shanghai HLS now
